DZ2G450DIAL LED Dial Type Dimmer 3W-450W

HKD 400.00
HKD 340.00

Brand: Legend Tech H.K.

Model No.: DZ2G450DIAL
Operation range : 220 – 240 VAC, 50Hz
Max Power : 450W
Min Power : 3W
Light Source : LED

*Switch surface plate not included, DIMEZE modules fit with Schneider-Clipsal E30 series compatible wall plates.

• Installer selectable Re-strike and Minimum Dimming Level Settings
• Suitable for Incandescent lights, Halogens, Low voltage lighting using electronics transformers,
• and LED lighting
• Restores last dimming setting when switched back on after being switched off
• Complies with IEC/EN60669-2-1 (LVD), IEC/EN55015, EN62547, EN61000-3-2, EN61000-3-3 (EMC)
• 5 Years Warranty

Feature & Benefits
The 2nd Generation of DIMEZE™ digital LED dimmer has FOUR distinct features to smooth out customers’ experience in LED lighting adaption.

1. Wide Range of Power Rating (3W – 450W)
In-rush current and Power Factors of LED drivers pose significant electrical stress to dimmers. De-rating for effective dimmer loading is required for actual operation. The 450W / 3W DIMEZE™ dimmer is preferred to narrower range devices (e.g. 200W / 10W) in order to ensure product safety and consistent dimming performance as the number of lamps increases and decreases during installation.

2. Auto-Select Load Suitability
DIMEZE™ dimmer supports a wide compatible loads from Dimmable LED, Incandescent, Halogen, Dimmable CFL, and Dimmable Electronic Transformers & Iron Core Transformers.

3. Minimum Dimming Level Setting
DIMEZE™ dimmer allows the user to dim and set a desired level as the minimum brightness level. In case of flickering, user can set the lowest possible brightness level just before flickering occurs and set it as new minimum.

4. Re-Strike and Last Dimmed Level
DIMEZE™ dimmer restores the lamp to the last dimmed lighting intensity at power-up. In case the lamp was last dimmed to a low level, Re-strike option that lights up the luminaries briefly at power-up gives a quick feeling that lamps operate normally.